Data acquisition
ABV SignalDAQ 2412i OEM™
A compact USB-C mixed-signal data acquisition device for high-resolution analog measurements, analog output control, digital I/O testing, and prototype validation with galvanically isolated USB connectivity. 12 AI (±10V) | 2 AO (0 to 5V) | 14 DIO
Key features
- USB-C measurement workflow with galvanically isolated USB data and isolated power architecture
- 12 single-ended or 6 differential analog input channels (±10V) with 24-bit resolution and sampling rates from 5 SPS to 1.067 MSPS
- 2 analog output channels (0 to 5V) with 16-bit resolution and aggregate streaming rates up to 1 MSPS
- 14 digital I/O channels with 3.3V or 5V logic variants for digital testing, control, and automation
- Protected signal architecture with TVS surge protection, ESD protection, current limiting, series resistance, and board-level filtering
- USB-powered design with eFuse input protection, boost conversion, and regulated internal rails
- 3.81 mm pluggable terminal block connectors for analog, digital, and control wiring
- Web documentation, examples, API notes, firmware downloads, calibration workflow, and reference assets
Technical specifications
- Interface
- USB-C, USB 2.0
- USB isolation
- Galvanically isolated USB 2.0 data path with isolated power architecture
- Analog input
- 12 single-ended or 6 differential input channels
- Analog input resolution
- 24-bit ADC-based measurement front end
- ADC sampling rate
- 5 SPS minimum; 1.067 MSPS maximum
- DAQ streaming rate
- 5 SPS minimum; 1 MSPS maximum aggregate streaming rate; up to approximately 83.3 kS/s per channel when scanning all 12 single-ended inputs; up to approximately 166.7 kS/s per channel when scanning all 6 differential inputs
- Analog output
- 2 analog output channels
- Analog output resolution
- 16-bit DAC-based analog output path
- Digital I/O
- 14 digital I/O channels, available in 3.3 V logic or 5 V logic variants
- Input protection
- TVS surge protection, ESD protection, current limiting, series resistance, and board-level filtering
- Power
- USB powered, with eFuse input protection, boost conversion, and regulated internal rails
- Field connectors
- 3.81 mm pluggable terminal block connectors
- Connector plug part numbers
- 20-position plug: MX15EDGRM-3.81-20P-GN01-Cu-A; 16-position plug: MX15EDGRM-3.81-16P-GN01-Cu-A
- Software
- Web documentation, examples, and API notes
- Firmware
- Versioned firmware downloads
- Calibration
- Calibration workflow for production hardware
Included in the box
- ABV SignalDAQ 2412i device
- USB-C cable
- 20-position terminal plug: MX15EDGRM-3.81-20P-GN01-Cu-A
- 16-position terminal plug: MX15EDGRM-3.81-16P-GN01-Cu-A
- Quick start card
- Safety and wiring notes
Use cases
- Engineering lab measurements
- Classroom demonstrations
- Maker and university projects
- Sensor readout and prototype validation
- Mixed-signal hardware testing
- Digital I/O experimentation
- Low-speed control and automation tests
- Bench measurements where USB isolation helps reduce ground-loop and noise problems
Shipping, warranty, and safety
Shipping is calculated at checkout.
Warranty and return policies are linked from the policy pages.
Review the safety notes, wiring limits, input ranges, output ranges, calibration limits, and isolation ratings in the product manual before use.
This product is not a certified safety instrument.
Do not connect the device directly to mains voltage.
FAQs
Is this product available now?
Yes. ABV SignalDAQ 2412i is shipping now.
Does the site store credit cards?
No. Payments are handled through Stripe Checkout.
How many analog inputs does it have?
The device supports 12 single-ended analog inputs or 6 differential analog inputs.
What is the sampling rate?
The ADC supports sampling from 5 SPS to 1.067 MSPS. The DAQ supports up to 1 MSPS aggregate streaming, with per-channel rate depending on how many inputs are enabled.
Does it have analog outputs?
Yes. The device includes 2 analog output channels with 16-bit resolution.
Does it support digital I/O?
Yes. The device includes 14 digital I/O channels and is available in 3.3 V logic and 5 V logic variants.
Is the USB connection isolated?
Yes. The device includes a galvanically isolated USB data path and isolated power architecture.
Which terminal plugs are included?
The box includes one 20-position MX15EDGRM-3.81-20P-GN01-Cu-A plug and one 16-position MX15EDGRM-3.81-16P-GN01-Cu-A plug.
Can I use it with Python or scripts?
Yes. Documentation, examples, and API notes are provided for software-based workflows.
Can the catalog support more products?
Yes. The product structure supports additional ABV Labs devices, firmware downloads, registration workflows, and support pages.